|
Luminaire Shown LED-MARKER01-SQU-H-F-001-ND12V-PB-WL-STD
Marker01 Square is a discreet luminaire that can be used to provide low-level illumination or mark a surface or object.
Punch Choose one of ten patterns on the face plate. You can also design your own pattern as long as it fits the 1.50" x 1.75" opening.
Construction Marker01 is constructed with a solid aluminum, brass or stainless steel faceplate with solid acrylic lens.
Mounting Marker01 mounts with two exposed screws to the Steel City 'CX' series of single gang electrical boxes.
Integral Driver Integral non-dimming 120V and 12VAC as well as dimming 24VDC drivers can be specified.
Dimming True 0-100% dimming is available with exclusive LightLink dimming system interface which is compatible with both 0-10V sink and source-type dimmers.
Power Requirements Marker01 consumes a maximum of 4W.
Finish Face plates in natural metal finishes, except stainless steel, have a protective clear topcoat. Face plates with a painted finish use our two-part wet paint system. Primer finish and custom color-matched finishes are also available.
Wet Location with “WL” option
|
|